Skip to header Skip to main navigation Skip to main content Skip to footer

User account menu

  • Log in
Home
Workshop Calculation and Science
ITI Workshop Calculation & Science – Complete Study Guide

Main navigation

  • Home
  • Question Paper
  • Syllabus
  • Video
  • Employability Skills (opens in new tab)
  • Engineering Drawing (opens in new tab)
  • Hunnarbaaz (opens in new tab)
  • ITI Tools (opens in new tab)
  • Syllabus (opens in new tab)

Workshop Calculation Semester 4 July 2018

  • Read more about Workshop Calculation Semester 4 July 2018

Workshop Calculation & Science - Semester IV

  1. For a sample to be truly representative of the population, it must truly be:
    a) Fixed
    b) Random ✔
    c) Specific
    d) Casual
  2. If the sample is truly representative of the population, then the characteristics of the sample can be considered to be the same as those of the ______ population.
    a) Fixed
    b) Selected
    c) Random
    d) Entire ✔
  3. The purpose of heat treatment is:
    a) To change the mechanical properties of steel
    b) To change the internal structure of steel ✔

Workshop Calculations Semester 3 January 2018

  • Read more about Workshop Calculations Semester 3 January 2018

Workshop Calculation & Science - Semester III (Jan 2018)

  1. If one angle of a triangle equals the sum of the other two, the triangle is:
    a) Right angle triangle ✔
    b) Isosceles triangle
    c) Acute angled triangle
    d) Obtuse angled triangle
  2. Angles in ratio 2:4:3 → smallest angle =
    a) 60°
    b) 40° ✔
    c) 80°
    d) 20°
  3. Part of circumference of a circle is called:
    a) Diameter
    b) Radius
    c) Arc ✔
    d) Chord
  4. Number of tangents from a point on the circle:
    a) 2
    b) 3
    c) 0
    d) Infinite ✔

Workshop Calculations Semester 3 July 2017

  • Read more about Workshop Calculations Semester 3 July 2017

Workshop Calculation & Science - Semester III (July 2017)

  1. Velocity, Density and Acceleration are known as:
    a) Fundamental quantities
    b) Derived quantities ✔
    c) Similitude
    d) SI unit
  2. A sheet 10 m × 5 m is cut into pieces of 25 cm × 20 cm. Number of pieces:
    a) 800 pieces
    b) 825 pieces
    c) 1000 pieces ✔
    d) 725 pieces
  3. Sin (90 + θ) =
    a) Cos θ ✔
    b) Tan θ
    c) Sin θ
    d) Sec θ
  4. The unit of work is:
    a) Joule ✔
    b) Watt
    c) Newton
    d) Pascal
  5. 36 inches = ______ cm
    a) 80.5
    b) 91.44 ✔
    c) 101.88

Workshop Calculations Semester 4 January 2018

  • Read more about Workshop Calculations Semester 4 January 2018

Workshop Calculation & Science - Semester IV (Jan 2018)

  1. The coefficient of friction μ is equal to:
    a) F/R ✔
    b) F × R
    c) R/F
    d) None of these
  2. What will be the coefficient of friction when a force of 30 N is required to move a mass of 5 kg?
    a) 0.0875
    b) 0.8
    c) 0.795
    d) 0.695 ✔
  3. When frictional force is equal to applied force, it is known as:
    a) Dynamic friction
    b) Limiting friction ✔
    c) Sliding friction
    d) Rolling friction
  4. The property of one surface to oppose motion of another is called:
    a) Force

Workshop Semester 4 July 2017

  • Read more about Workshop Semester 4 July 2017

Workshop Calculation & Science - Semester IV (July 2017)

  1. What is the correct value of π?
    a) 22/7 ✔
    b) 7/22
    c) 3.4
    d) 3/4
  2. The outer diameter of a pipe is 100 cm, then the outer circumference will be:
    a) 62.8 m²
    b) 628.32 mm²
    c) 6283.2 m²
    d) 628.32 cm ✔
  3. The pressure is given by:
    a) Force / Area ✔
    b) Area / Force
    c) Stress / Strain
    d) Strain / Stress
  4. 2.5 tonnes can be expressed in kg as:
    a) 250 kg
    b) 25 kN
    c) 250 N
    d) 2500 kg ✔
  5. Tanθ is equal to:
    a) Cosθ / Sinθ

Workshop Calculation Semester 1 July 2018

  • Read more about Workshop Calculation Semester 1 July 2018

Workshop Calculation & Science - MCQs

  1. 0.1 × 0.01 = 
    a) 0.1
    b) 0.01
    c) 0.001
    d) 0.0001
    Answer: d) 0.0001
  2. If volume = 62 m³ and mass = 62000 kg, density =
    a) 100 kg/m³
    b) 10 kg/m³
    c) 1000 kg/m³
    d) 1×10⁻³
    Answer: c) 1000 kg/m³
  3. Perimeter of rectangle = 320 m, ratio = 5:3, area =
    a) 6000 m²
    b) 3000 m²
    c) 12000 m²
    d) 24000 m²
    Answer: d) 24000 m²
  4. Force due to gravity is called:
    a) Weight
    b) Force
    c) Mass
    d) None
Pagination
  • First page « First
  • Previous page ‹ Previous
  • Page 1
  • Page 2
  • Page 3
  • Current page 4
Subscribe to

Video

Semester-II Workshop calculation and science Paper II

Question Paper

  • Workshop Calculation Semester 4 Jan 2017
  • Workshop Calculation Semester 4 Jan 2018
  • Workshop Calculation Semester 3 July 2017
  • Workshop Calculation Semester 2 July 2018
  • Workshop Calculations Semester 1 January 2018
  • Workshop Calculations Semester 1 July 2017
  • Workshop Calculations Semester 1 July 2018
  • Workshop Calculations Semester 2 January 2018
  • Workshop Semester 2 July 2017
  • Workshop Semester 2 July 2018
  • Workshop Calculations Semester 3 July 2018
  • Workshop Calculation Semester 4 July 2018
  • Workshop Calculations Semester 3 January 2018
  • Workshop Calculations Semester 3 July 2017
  • Workshop Calculations Semester 4 January 2018
  • Workshop Semester 4 July 2017
  • Workshop Calculation Semester 1 July 2018
  • Workshop Calculation Semester 2 July 2018
  • Workshop Calculation Semester 2 July 2017
  • Monthly test (November-2015)
  • Workshop Calculation Semester 1 Jan 2018
  • Workshop Calculation & Science Sem 2 Jan 2018
  • Workshop Calculation Semester 3 July 2018
  • Workshop Calculation Semester 3 Jan 2018

Common Subject

  • Engineering Drawing
  • Employability Skills
  • Workshop Calculation Science

Directory

  • Industrial Training Institutes
  • Engineering College
  • Medical College

Electrician + Wireman + Electroplater + Electrician Power Distribution + Lift and Escalator Mechanic | ITI Fitter | ITI COPA | ITI Welder | ITI Mechanic | ITI Electronics | Agriculture + Horticulture + Floriculture | ITI Draughtsman Civil & Mech | ITI Refrigeration & Air Conditioning | ITI Turner | ITI Plumber | ITI Machinist | ITI Cosmetology | ITI Sewing | ITI Surveyor

All Syllabus

  • ITI Syllabus
  • CTS Syllabus
  • CITS Syllabus
  • Apprenticeship Training Scheme
  • Flexi MOU Syllabus
  • जन शिक्षण संस्थान Syllabus

Copyright © 2026 ITI Directory - All rights reserved

Developed and Designed by ITI Directory